Embedded Tools
With our starter kit display 4.3 inches you can start programming your application and your graphic design straight away. If necessary, we will be happy to support you with customer-specific hardware adaptation requests and questions about firmware creation.
Features:
- TFT-Display 4,3 inch- 480 x 272 pixel
- Touch capacitive
- CPU STM32F429BIT6
- SDRAM 4Mx32bit
- NOR Flash 8Mx16bit
- Ethernet 10/100 - RJ45 via Break Out Board
- USB Typ-A Host - e.g. for USB memory sticks
- USB Typ-B - for boot loader and/or gernal communication
- microSD-Card
- BLE Module BMD-300
- BLE- and Wifi-Modul ESP32-WROOM-32
- Buzzer with sound pressure level min. 90dBA @ 2,73kHz
- Temperature and humidity sensor BME680
- 2 x Connector with CAN, I2C, SPI, PWM, ADC, GPIO
- 3 x LED for general use
- 1 x Taster for general use
- 1 x Taster for reset
- Power supply 12 Volt ± 20%
- Power supply 12 Volt ± 20% mit UART
- ST-Link Debug Connector
- Temperature range -20°C up to +70°C
- Humidity up to 90% RH bei 60°C
Documents:
Schematic 4.3_inch_Display_Control_Board_V200_Var1.pdf
Dimensions 4.3_inch_Display_Assembly_Horizontal.pdf
Dimensions 4.3_inch_Display_Assembly_Vertical.pdf
Step File STM32_Display_4.3_Horizontal.zip
We are happy to discuss all your requirements and wishes. You can contact us by phone at 08142/305050 or via email m.bittner@ebs-systart.com.
With our starter kit STM32 Display 5.0 inches you can start programming your application and your graphic design straight away. If required, we will be happy to support you with firmware development and customer-specific hardware development.
Features:
- Display 5,0 Zoll - 800 x 480 pixel
- Touch capacitive
- CPU STM32F429BIT6
- SDRAM 4Mx32bit
- NOR Flash 8Mx16bit
- Ethernet 10/100 - RJ45 via Break Out Board
- USB Typ-A Host - e.g. for USB memory sticks
- USB Typ-B - for boot loader and/or gernal communication
- microSD-Card
- BLE Module BMD-300
- BLE- and Wifi-Modul ESP32-WROOM-32
- Buzzer mit Druckpegel min. 90dBA @ 2,73kHz
- Temperature and humidity sensor BME680
- 2 x Connector and CAN, I2C, SPI, PWM, ADC, GPIO
- 3 x LED for general use
- 1 x Taster for general use
- 1 x Taster for reset
- Power supply 12 Volt ± 20%
- Power supply 12 Volt ± 20% with UART
- ST-Link Debug Connector
- Temperature range -20°C up to +70°C
- Humidity up to 90% RH bei 60°C
Documents:
Schematic STM32_Display_5.0_V100_Var1.pdf
Dimensions STM32_Display_5.0_Horizontal.pdf
Dimensions STM32_Display_5.0_Vertikal.pdf
Step File STM32_Display_5.0_Horizontal.zip
Step File STM32_Display_5.0_Vertical.zip
Picture Starterkit STM32 Display 5.0 inch - laterally from above
Picture Starterkit STM32 Display 5.0 inch - laterally from below
We are happy to discuss all your requirements and wishes. You can contact us by phone at 08142/305050 or via email m.bittner@ebs-systart.com.
Our motor electronics provide you with absolute control over your applications with brushless motors (BLDC motors) and brushed motors (DC motors). Thanks to advanced control and regulation algorithms, you achieve maximum precision in speed, velocity, and positioning control. With the integrated S-curve algorithm, your motor applications accelerate and decelerate even more smoothly and with reduced vibrations. The S-curve parameters also work under start conditions with v ≠ 0 and a ≠ 0 – this enables, for example, smooth direction reversal when a new position is specified. The available controller modes include position over time as well as velocity over position.
Through flexible adaptations of hardware, form factor, firmware, and cable sets, we integrate our motor electronics seamlessly into your system architecture. Preconfigured interfaces such as CANopen, CAN, UART, or PWM enable straightforward connectivity and rapid commissioning.
CAD illustrations: Custom integration according to customer requirements
Our motor electronics are the perfect solution for industrial applications, automotive, or special-purpose machinery. Benefit from personalized consulting, rapid development, and in-house production. We place the highest value on reliability and robustness, ensuring that your application performs even under the most demanding conditions. With us, you take your drive application to the next level!
Technical Request
We will be happy to discuss all your requirements and requests. You can contact us by phone at 08142/305050 or via email m.bittner@ebs-systart.com.
Our modular system for mobile communications applications forms the foundation for your networked electronics. Whether GPS trackers, weather stations, or complex IoT systems – with our many years of experience, we develop your customized mobile communications solution in hardware and firmware that is reliable, efficient, and future-proof. We also develop application-specific PC software for convenient configuration of your networked devices – for example, importing security certificates, network addresses, and provider information.
Our IoT cloud platform offers particular added value. It is designed to reliably receive and process all data from your devices and prepare comprehensive analyses. This provides you with a holistic solution from a single source – from hardware to the cloud! You can find an overview of the cloud's technical details here hier.
The modular design of our solutions allows you to expand your systems at any time and adapt to new requirements. Security, scalability, and performance are our top priorities – from data transmission via mobile networks to cloud analytics. We have extensive experience, particularly in the area of GPS tracking, and implement precise, energy-efficient, and reliable applications. We also develop battery-operated systems with custom-manufactured battery packs that ensure maximum independence and long operating times. This provides you with a future-proof IoT platform that optimally meets your current needs while also offering scope for the further development of your projects.
Technical Request
We will be happy to discuss all your requirements and requests. You can contact us by phone at 08142/305050 or via email m.bittner@ebs-systart.com.
Near ubiquitous broadband Internet connecting a multitude of distributed embedded systems in the IoT world,introduces new challenges in data transfer performance and communication security. The Oxalis meets these challenges head on and provides a high performance IoT gateway solution with low power consumption in a modular architecture.
Documents:
Oxalis_Datasheet_V101
Oxalis_Schematic_V210_Var1_A
Oxalis_Assembly_V210_Var1_A
Oxalis_SOM_Schematic_V200_Var1_A
Oxalis_SOM_Assembly_V200_Var1_A
Oxalis-Getting-Started_V001
Oxalis-SDK_Developer_Manual_V008
Oxalis-Test_Suite_User_Manual_V003
kernel_stable_20181201.itb
For further information please visit www.github.com.